newby

If you are new to the board or have never made a post before, don't just lurk around, post in here and introduce yourself and your Minor if you have one. It would be great to hear from you.

Re: newby

Postby Ronnie » Sun Aug 05, 2018 7:58 am

Hi anyone know were I could purchase cylinder head bolts for my 803cc moggie engine and a bit of technical advise how do you replace the "scroll" seal regards Ronnie
Ronnie
.
 
Posts: 12
Joined: Sun Jul 22, 2018 8:09 am

England (en) UK Durham City (ea)

Re: newby

Postby The vast minority » Sun Aug 05, 2018 4:52 pm

Hi
is it too bad to drive? Bring it to Pateley Bridge if its ok, we can have a good look at it.
Ive not taken an A series to bits but ive got a few copied of the manual. You can also download it from the left hand side on the home page of this forum.

Ge good to see you at Pateley Bridge,

Al
User avatar
The vast minority
.
 
Posts: 1611
Joined: Wed Jul 09, 2014 5:28 am
Awards: 5
Contributions 2014 (1) Contributions 2015 (1) Contributions 2016 (1) Contributions 2017 (1) Contributions 2018 (1)

United Kingdom (uk)

Re: newby

Postby Ronnie » Sun Aug 05, 2018 5:32 pm

Sadly the engine is on the bench only have weekends to sort her out.but thanks for the invite regards Ronnie
Ronnie
.
 
Posts: 12
Joined: Sun Jul 22, 2018 8:09 am

England (en) UK Durham City (ea)

Re: newby

Postby woodywoodchipper » Sun Aug 05, 2018 5:52 pm

scroll seal cannot be replaced, its machined in manufacture,
Image

When its done its done (for now)
Derv Turbo Power (Joosed)
User avatar
woodywoodchipper
.
 
Posts: 3792
Joined: Sun Nov 07, 2010 5:11 pm
Location: up to my neck in dudu
Awards: 7
Contributions 2011 (1) Contributions 2012 (1) Contributions 2013 (1) Contributions 2015 (1) Contributions 2016 (1)
Contributions 2017 (1) Contributions 2018 (1)

United Kingdom (uk) UK Lancashire (lk)

Re: newby

Postby Ronnie » Mon Aug 06, 2018 12:54 pm

That's okay been reading about it I will concentrate on sorting oil leaks and reducing pressure in the sump etc Thanks again for your input Regards Ronnie
Ronnie
.
 
Posts: 12
Joined: Sun Jul 22, 2018 8:09 am

England (en) UK Durham City (ea)

Re: newby

Postby Ronnie » Sat Aug 11, 2018 4:41 pm

Little bit of help identifying engine . ENGINE NUMBER IS (8AG -F-U-H 14328) any help most appreciated
Ronnie
.
 
Posts: 12
Joined: Sun Jul 22, 2018 8:09 am

England (en) UK Durham City (ea)

Re: newby

Postby Panky » Sat Aug 11, 2018 5:18 pm

Looks like it's from a van, scroll down the page a bit
From
http://www.mg-cars.org.uk/news/news498.html

Morris 1000 GPO van 948cc 8AG after 1962
Image
User avatar
Panky
.
 
Posts: 1089
Joined: Sun Mar 22, 2015 6:00 pm
Location: Cheshire

United Kingdom (uk) UK England (.g)

Re: newby

Postby Ronnie » Sat Aug 11, 2018 5:46 pm

That's what I got it to GPO AUSTIN VAN 1962?
Ronnie
.
 
Posts: 12
Joined: Sun Jul 22, 2018 8:09 am

England (en) UK Durham City (ea)

Previous

Return to Introduce Yourself



Who is online

Users browsing this forum: No registered users and 0 guests

cron