convertible draught exluder

Seats, carpets, trim & improvements

convertible draught exluder

Postby charlie_morris_minor » Fri May 11, 2018 6:50 pm

my post production convertible never had the caps on the A and B post that finish of the draught excluder

i assume they are attached by a self tapping screw, but if any one could take a photo to confirm how they fit i would be thank full

DSCN7189.JPG

DSCN7190.JPG
charlie_morris_minor
.
 
Posts: 130
Joined: Sat Feb 26, 2011 7:29 am
Location: aldershot
Awards: 1
Contributions 2013 (1)


Re: convertible draught exluder

Postby woodywoodchipper » Sat May 12, 2018 6:28 pm

1/8th short rivet, on to the edge the draught excluder fits, then fiddle it up inside for a neat finish ;)
Image

When its done its done (for now)
Derv Turbo Power (Joosed)
User avatar
woodywoodchipper
.
 
Posts: 3792
Joined: Sun Nov 07, 2010 5:11 pm
Location: up to my neck in dudu
Awards: 7
Contributions 2011 (1) Contributions 2012 (1) Contributions 2013 (1) Contributions 2015 (1) Contributions 2016 (1)
Contributions 2017 (1) Contributions 2018 (1)

United Kingdom (uk) UK Lancashire (lk)

Re: convertible draught exluder

Postby charlie_morris_minor » Fri May 18, 2018 7:01 pm

thanks for the correction, i know have a rivet gun.. never had the need for one before.

could i be a pain and ask if you could post a photo of the door pillar to see the way the metal cap sits against the plastic trim? i.e is it level with the plastic trim, or below it?
charlie_morris_minor
.
 
Posts: 130
Joined: Sat Feb 26, 2011 7:29 am
Location: aldershot
Awards: 1
Contributions 2013 (1)



Return to Interior & Trim



Who is online

Users browsing this forum: No registered users and 0 guests