Fuel Gauge woes

Loom, lights, gauges, indicators & wiring

Re: Fuel Gauge woes

Postby RussLCV » Sun Jul 08, 2018 1:02 pm

WP_20180708_13_46_01_Pro (2).jpg


Just modified another hope I have done it correctly
Russell Harvey
Freelance Motoring Journalist
Minor LCV Register Historian
RussLCV@gmail.com
http://www.Minorlcvreg.co.uk
User avatar
RussLCV
.
 
Posts: 167
Joined: Thu Mar 20, 2008 6:00 pm
Location: Cardiff, Wales

Wales (wl)

Re: Fuel Gauge woes

Postby RussLCV » Sun Jul 08, 2018 3:47 pm

WP_20180708_16_15_14_Pro (3).jpg


Fitted and it works

I reckon its at least a third full but not half so I am pleased how the gauge is reading about where it should!

Sincere thanks to all especially 58 might & emjay
Russell Harvey
Freelance Motoring Journalist
Minor LCV Register Historian
RussLCV@gmail.com
http://www.Minorlcvreg.co.uk
User avatar
RussLCV
.
 
Posts: 167
Joined: Thu Mar 20, 2008 6:00 pm
Location: Cardiff, Wales

Wales (wl)

Re: Fuel Gauge woes

Postby 58 MOGGY » Sun Jul 08, 2018 3:49 pm

Nice one,we got it together in the end


Sent from my iPhone using Tapatalk
Dunk
User avatar
58 MOGGY
.
 
Posts: 447
Joined: Tue Aug 07, 2012 9:14 pm
Location: Berkshire

England (en)

Re: Fuel Gauge woes

Postby RussLCV » Sun Jul 08, 2018 3:59 pm

58 MOGGY wrote:Nice one,we got it together in the end


Sent from my iPhone using Tapatalk

Thanks again mate
Russell Harvey
Freelance Motoring Journalist
Minor LCV Register Historian
RussLCV@gmail.com
http://www.Minorlcvreg.co.uk
User avatar
RussLCV
.
 
Posts: 167
Joined: Thu Mar 20, 2008 6:00 pm
Location: Cardiff, Wales

Wales (wl)

Re: Fuel Gauge woes

Postby emjay » Sun Jul 08, 2018 6:07 pm

Great job. Isn't it great to conquer these little battles with a little modification. You'll be able to calibrate the end points by reshaping the arm and keep a reserve if you want. As long as the back floor is loose, it's real easy to access on a truck.
emjay
.
 
Posts: 253
Joined: Wed Oct 09, 2013 7:02 pm
Location: Eastern Pennsylvania, USA


Re: Fuel Gauge woes

Postby RussLCV » Thu Jul 19, 2018 8:27 pm

Sadly been away and now the fuel gauge does not move! I removed the adapted sender replaced it with the Ford one and up it goes so the gauge and wiring are working fine. The adapted sender was working is it just a chance that the sender that has worked for years in my old tank and just expired...….or any other reason?

2.jpg

3.jpg


see above glued and soldered in place the fact the sender is immersed in fuel will that have any effect on it? the ford one is mounted in the same place

Any further info assistance needed

Does anyone know who makes the sender units ideally so I can purchase a new one without the mounting disk


Thanks again in advance
Russell Harvey
Freelance Motoring Journalist
Minor LCV Register Historian
RussLCV@gmail.com
http://www.Minorlcvreg.co.uk
User avatar
RussLCV
.
 
Posts: 167
Joined: Thu Mar 20, 2008 6:00 pm
Location: Cardiff, Wales

Wales (wl)

Re: Fuel Gauge woes

Postby emjay » Thu Jul 19, 2018 8:41 pm

Does the float move? Can you make it move? Today's fuel has some many additives that if the car sits too long, the additives tend to glue things. I had some stop working, but I just pulled them out of the tank and freed the arm and now work fine again.
emjay
.
 
Posts: 253
Joined: Wed Oct 09, 2013 7:02 pm
Location: Eastern Pennsylvania, USA


Re: Fuel Gauge woes

Postby RussLCV » Thu Jul 19, 2018 9:17 pm

yes... ... all moves freely
Russell Harvey
Freelance Motoring Journalist
Minor LCV Register Historian
RussLCV@gmail.com
http://www.Minorlcvreg.co.uk
User avatar
RussLCV
.
 
Posts: 167
Joined: Thu Mar 20, 2008 6:00 pm
Location: Cardiff, Wales

Wales (wl)

Re: Fuel Gauge woes

Postby 58 MOGGY » Tue May 14, 2019 7:16 pm

Hi returning to you fuel gauge issue,ive just changed to another fuel tank which has completely messed up my gauge reading.Ive got around problem by using this little box of tricks from car builder solutions,it enables any gauge to work with any sender,easy to fit then you program both sender and gauge to read perfectly.
IMG_0301.JPG
Dunk
User avatar
58 MOGGY
.
 
Posts: 447
Joined: Tue Aug 07, 2012 9:14 pm
Location: Berkshire

England (en)

Re: Fuel Gauge woes

Postby RussLCV » Tue May 14, 2019 7:41 pm

are they expensive
Russell Harvey
Freelance Motoring Journalist
Minor LCV Register Historian
RussLCV@gmail.com
http://www.Minorlcvreg.co.uk
User avatar
RussLCV
.
 
Posts: 167
Joined: Thu Mar 20, 2008 6:00 pm
Location: Cardiff, Wales

Wales (wl)

Re: Fuel Gauge woes

Postby 58 MOGGY » Tue May 14, 2019 7:44 pm

It was £50,but the only alternative was a programmable gauge which are about £200,but i wanted to use original gauge on speedo
Dunk
User avatar
58 MOGGY
.
 
Posts: 447
Joined: Tue Aug 07, 2012 9:14 pm
Location: Berkshire

England (en)

Previous

Return to Electrics, Instrumentation & Security



Who is online

Users browsing this forum: No registered users and 2 guests