Headlining again

Seats, carpets, trim & improvements

Headlining again

Postby drivewasher » Wed Apr 01, 2015 11:37 am

Can anyone post a pic of where the front tension wire fixes as I can't find the pics I took. Thanks, it's holding the glove boxes and lids up now. Also van people where the rear wire n screw goes

Ta luvs
I'm always in the sh*t. It's only the depth that varies!
User avatar
drivewasher
.
 
Posts: 470
Joined: Sun May 30, 2010 9:01 pm
Location: Golborne, Wigan
Awards: 4
Contributions 2012 (1) Contributions 2013 (1) Contributions 2014 (1) Contributions 2015 (1)


Re: Headlining again

Postby emjay » Wed Apr 01, 2015 4:53 pm

You'll find a self tapped hole near a slot in the panel below the glove boxes. The cable goes through the slot (or larger hole) and then around the screw. all of that is done from below. For the B post, the screw hole will be under the upper cover (original access to trafficators) and near the top.
emjay
.
 
Posts: 253
Joined: Wed Oct 09, 2013 7:02 pm
Location: Eastern Pennsylvania, USA


Re: Headlining again

Postby 200272 » Tue Apr 30, 2019 9:31 pm

drivewasher wrote:Can anyone post a pic of where the front tension wire fixes as I can't find the pics I took. Thanks, it's holding the glove boxes and lids up now. Also van people where the rear wire n screw goes

Ta luvs



Hi I’m about to do this, I have no base to start with as none of the vans have a headlining, do you have any tips or pictures to help?

Thanks Tom.
The Bean: 1972 2002tii (ish), 5speed E21 O/D, 6 series Recaro interior.
Green Bean V8 M60 conversion

Sideways!
200272
.
 
Posts: 260
Joined: Wed Nov 02, 2011 9:04 am
Location: London


Re: Headlining again

Postby Sleeper » Wed May 01, 2019 8:11 pm

Only one relevant piccie sorry....

2017_11210headlining0005.JPG



John ;)
Sleeper
.
 
Posts: 231
Joined: Wed Nov 09, 2016 7:11 am
Location: Manchester U.K.

Great Britain (GB)


Return to Interior & Trim



Who is online

Users browsing this forum: No registered users and 1 guest