1098cc super charger

Side valve, 803, 948, 1098., 1275 and Vizard mods

1098cc super charger

Postby gyp » Wed May 08, 2019 6:18 pm

Hi All,

Need some ideas, finally going to start building a bit of a minor sleeper, have looked into super charging kits so my idea is to use a 1098cc with sw5-07 cam with a jan speed/cooper head as trying to keep the compression right for the super charger to work. My reasoning for the 1098cc is the cost/availability and I have 3 sat ready along with the cylinder head, the cranks are good for 6000rpm hence the sw5 cam. I've built a few engines for mini's, last 2 mini's being Honda v tec engines, so thought I would try going back to an A series with a super charger to be a bit different.I could pocket the block and fit a 12g940 head but can do that at a later date once I test the charger.

Anyone tried this route before and know the pit falls?

cheers
gyp
.
 
Posts: 6
Joined: Sun Jul 17, 2016 4:51 pm

Wales (wl) UK Wales (.l)

Re: 1098cc super charger

Postby plastic orange » Thu May 16, 2019 4:16 pm

Send 2fry a pm, he's done it quite a few years ago and should be able to advise.

PO
Undefeated best Orange Hawaiian award Pateley Bridge 5 years in a row.
User avatar
plastic orange
.
 
Posts: 5325
Joined: Mon Oct 27, 2008 7:38 pm
Location: Broughty Ferry, Scotland
Awards: 10
Contributions 2011 (1) Contributions 2012 (1) Contributions 2013 (1) Contributions 2014 (1) Contributions 2015 (1)
Contributions 2016 (1) Contributions 2017 (1) Contributions 2018 (1) Contributions 2019 (1) Members Choice Award (1)

Scotland (sf) UK Scotland (.j)


Return to Engine



Who is online

Users browsing this forum: No registered users and 3 guests